Get a Quote Schedule a Demo Contact a Dealer Contact TYMCO

TYMCO Regenerative Air Sweepers

P.O. Box 2368
Waco, TX 76703-2368

(800) 258-9626

Home Sweepers Environment Dealers Owners About Us

Sweeper Options



  • Lateral Airflow Nozzle (LAN)
    In situations where debris needs to be cleared from runways and taxiways as quickly as possible, the TYMCO Lateral Airflow Nozzle (LAN) allows the Model HSP® operator to use a controlled, high velocity air blast to clear debris such as sand, snow and grass clippings off of paved surfaces back into greenspace.  The LAN diverts air from the blower to a nozzle mounted on the left hand side of the sweeper behind the truck cab.  The LAN opening can be adjusted and rotated 360 degrees for air blast positioning and switching from sweeping to the Lateral Airflow Nozzle is all controlled from within the cab.
  • Liquid Recovery System (LRS)
    The Liquid Recovery System (LRS) allows the Model HSP to be used for recovery of standing liquids such as glycol that can accumulate around aircraft on aprons or staging areas.  With increased environmental regulations on airports in regards to glycol entering stormwater runoff, airport administrators need to have a system in place for glycol recovery.  The TYMCO LRS allows the Model HSP to become even more versatile by making it a multipurpose machine – a machine for both sweeping and glycol recovery.  The LRS has a liquid level sensor with a light on the control panel that indicates when the sweeper is full of over 700 gallons of glycol or other deicing fluid.  The LRS assists in pumping off liquid that was recovered while leaving any solids such as sand in the hopper for dumping.  A pump is also available to facilitate removal of glycol to a suitable storage location or evacuation tanker for disposal.
  • Magnet Assembly
    The truck chassis mounted magnet assembly comes with in-cab controls for raising and lowering the magnet to the paved surface.  The magnet is self-cleaning and comes in standard duty and heavy duty strengths for removal of ferrous metals at fast sweeping speeds up to 25 mph.

Auxiliary Hand Hose

  • Auxiliary Hand Hose
    The 10’ hand hose is 8” in diameter and comes with a 42” aluminum nozzle.  It is designed for cleaning in tight areas commonly found on airfields such as around taxiway lighting, grounding points and fence lines.  An additional 10’ hose is available with a quick coupler for even more versatile cleaning.
  • Auxiliary Hand Hose with Hydraulic Boom Assist
    The heavy duty 10’ hand hose is 8” in diameter and comes with a 42” aluminum nozzle.  The hydraulically powered boom for the heavy duty hose can be raised and lowered with a hand-held pendant.  Designed for cleaning storm drain catch basins as well as tight areas commonly found on airfields.  If deep catch basins need to be cleaned you can add up to 2 additional aluminum nozzles for storm drains over 126” deep.
  • Storm Drain Catch Basin Package
    The Storm Drain Catch Basin Package comes with all of the options and accessories needed to quickly and easily clean out catch basins as well as tight areas commonly found on airfields such as around taxiway lighting, grounding points and fence lines.  This package comes with the Heavy Duty Auxiliary Hand Hose with Hydraulic Boom Assist, Hi/Low Pressure Wash Down System, Wash Down System Hose Reel, Boom Assist Wireless Remote and 1 additional aluminum nozzle.  If deep catch basins need to be cleaned you can add up to 1 more aluminum nozzle for storm drains over 126” deep.

    Operator Friendly & Productivity

    • Gutter Broom Tilt Adjuster – Left, Right or Twin
      The gutter broom tilt adjuster uses in-cab controls to adjust the gutter broom to the pitch of the surface being swept.  The deepest curbs or gutters along airport ramps or aprons are no challenge when your Model HSP’s gutter brooms are equipped with tilt adjusters.
    • Hopper Deluge System
      The Hopper Deluge System is a high volume water system designed to expedite flushing of the hopper after sweeping.
    • Rear View Back-Up Camera and Display
      Airfields are full of expensive equipment such as aircraft and Ground Support Equipment (GSE) as well as many other objects that need to be seen when backing up.  The rear view back-up camera with in-cab display allows the operator to view the area behind the Model HSP while backing up providing additional safety and peace-of-mind to both Model HSP operators and airport administrators.
    • Stainless Steel Hopper
      For maximum corrosion and salt spray resistance, all hopper body sheets as well as the hopper screen are fabricated with low carbon, high chrome stainless steel.  Stainless steel bolt-on blower housing, dust separator and hopper drain are also available.
    • Hopper Drain System
      Allows the Model HSP to operate in wet conditions by draining water picked up while sweeping.
    • Hopper Load Indicators
      Sensor with audible and visual indicators in-cab that signals a full hopper load.
    • Variable Speed Gutter Brooms
      Allows the gutter broom speed to be controlled from inside the cab to adjust the broom speed to the type of debris being swept; for example, slowing the brooms down in extremely dusty environments to reduce the amount of ambient dust being kicked up.


    Alternative Fuel

    • CNG
      In our continuing commitment to environmentally conscious sweeping, TYMCO offers a CNG (Compressed Natural Gas alternative fuel option for the Model HSP. The Model HSP CNG option is available as a Dedicated Unit, where both the sweeper and the truck chassis are CNG powered.

    For options not detailed, contact your TYMCO dealer.