Specifications
- Conventional
- COMDEX
- Cabover
SWEEPER AUXILIARY ENGINE, DIESEL (STANDARD)
- Engine - John Deere, 4045T, 4 cyl. (Tier 3)
- Displacement - 275 cubic inches (4.5 L)
- Horsepower - 99 @ 2,400 RPM (74 kW)
- Net torque - 261 ft-lb @1600 RPM (354Nm)
- Air cleaner, heavy duty - Dry type
- Oil filter, spin on - Full flow
- Auxiliary engine shutdown system
BLOWER, RUBBER LINED
- Aluminum alloy high volume open face turbine
- Purpose - Creates blast and suction
- Bearings - (2) sealed lifetime lube, anti-friction
- Bolt-on housing - Abrasion resistant, replaceable liner
- Drive - Heavy duty power band
DUST SEPARATOR
- Type - Cyclonic, multipass, centrifugal separation
- Size - 20" x 61" cylindrical area (508 mm x 1549 mm)
- Location - Axial to blower within hopper super structure
- Particulate removal - Through 61" (1549 mm) skimmer slot into hopper
- Inspection - Hinged door, opened from hopper exterior
- Housing - Abrasion resistant, w/replaceable wear resistant liner
HOPPER
- Capacity (volumetric) - 7.3 cubic yards (5.6 m³)
- Capacity (useable) - 6 cubic yards (4.6 m³)
- Construction - Welded steel plate with integral stiffeners
- Floor angle - 22°
- Dump door opening - 84" x 44" I.D. (2134 mm x 1118 mm)
- Dumping method - Hydraulic with raker bar
- Dumping height - 36" (914 mm)
PICK-UP HEAD
- Function - Air blast and suction chamber
- Width - 87" I.D. (2210 mm)
- Head area - 2,610 sq. inches (1.68 m²)
- BAH® area - 3,567 sq. inches (2.3 m²)
- Suspension - 4 springs 2 drag links
- Skids - DUO-SKIDS®
- Suction & Pressure hose - 14" diameter (356 mm)
- Pressure bleeder - Integral for leaf/light material pickup
GUTTER BROOMS, DUAL (PATENTED)
- Standard equipment includes floodlights and parabolic mirrors
- Drive - Constant speed non-reversible hydraulic motor
- Adjustment - Adjustable for down pressure, pattern and wear
- Down pressure - Automatically adjusts to requirement
- Flexibility - All directions integral anti-damage "swing away" relief valve
- Broom - 43" dia. (914 mm) steel wire, vertical digger
HYDRAULIC SYSTEM
- Operates gutter broom(s), dump and pick-up head
- Drive (diesel) - Gear driven from auxiliary engine
- Drive (CNG) - Belt driven from auxiliary engine
- Capacity - 8 GPM (30.3 LPM)
- Reservoir - 25 gal. (94.6 L) with 80 mesh suction strainer, site/temperature gauge, cooler
- Filter - 10 micron in-line
DUST CONTROL SYSTEM
- System of water spray nozzles for airborne dust suppression
- Pump - Electric diaphragm
- Reservoir(s) Polyethylene - 220 gal. (832.7 L) with hydrant fill hose
- Filter - 80 mesh in-line
- Low water shut-off - Safety shut-off with low water warning light in cab coupled with liquid level sensor
- Spray nozzles:
- Around pick-up head - 4
- Gutter brooms (each) - 2
- Hopper (inside) - 1
CONTROLS
- Inside cab (lighted) - Pick-up head, gutter broom(s), ignition and tachometer (auxiliary engine), voltmeter, low water warning system (for dust control system), all safety lights, hour meter, pressure bleeder
- Outside cab - Dump
- Steering - Dual
SAFETY WARNING DEVICES
- Amber rear mounted alternating flashing warning lights
- Amber beacon light with limb guard
- Back up alarm
OPTIONAL EQUIPMENT
- Abrasion protection package
- Auxiliary fuse panel
- Auto Sweep Interrupt
- Auxiliary hand hose 8" dia. (203 mm)
- Auxiliary hand hose hydraulic boom assist
- auxiliary hand hose catch basin cleaning package
- Auxiliary hydraulic system
- Broom Assist Pick-up Head (BAH®)
- Compressed Natural Gas (CNG) powered
- Extra water capacity - COMDEX of Cabover
- Dustless - (Model DST-6®)
- Gutter broom tilt adjuster(s) (right, left or both)
- Gutter broom variable speed
- Gutter broom Drop-Down
- Hi/Low pressure washdown system
- High output water system
- Hopper deluge
- Hopper drain system
- Hose reel, 50' retractable
- Liquid recovery system
- Low emissions package
- Magnet
- Pick-up head curtain filter
- Pick-up head deluge - (BAH)
- Propane LPG powered
- Rear camera / monitor system
- Reverse pick-up head system
- Runway Sweeper - Model HSP®
- Stainless Steel Hopper
- Color (other than TYMCO standard white)
Special options are available for your individual requirements. Contact your local dealer or TYMCO.
CAB/CHASSIS
Minimum Requirements- Model - International 4300 M-7
- GVW - 30,000 lbs. (13,620 kg)
- Frame - 50,000 PSI
- Engine - MaxxForce 7 389 CID (6.4 L) V8 Diesel - 220 HP
- Transmission - Allison 2500 RDS series 5 speed automatic w/external oil filter
- Alternator - 120 amp
- Batteries - (2) 12V 1300 CCA
- Wheelbase - 152" (3861 mm)
- Fuel tank - 50 gal. (189 L) shared with sweeper
- Tires (2-front, 4-rear) - Tubeless 11R x 22.5
- Steering (Dual) - Integral power assisted with tilt
- Brakes - Dual Air w/ 13.2 CFM air compressor
- Instruments & lights - Full package as required, back-up alarm
- Dual gauge package
- Mirrors - Electric remote controlled and heated
- Air conditioned cab
- AM/FM CD stereo radio
Consult factory for sweeper specifications and other available truck chassis.
GENERAL SWEEPING WIDTH
- Pick-up head only - 87" (2210 mm)
- 1 gutter broom - 110" (2794 mm)
- 2 gutter brooms up to - 142" (3606 mm)
OVERALL DIMENSIONS (APPROXIMATE)
- Length - 248" (6299 mm)
- Width - 96" (2438 mm)
- Height - 118" (2997 mm)
- Height, less beacon light - 103" (2616 mm)
- Empty weight* - 17,195 lbs (7806 kg)
- Weight (sweeper)* - 7,980 lbs (3622 kg)
* Dimensions and weight may vary with equipment.
Updated: 11/6/2011
SWEEPER AUXILIARY ENGINE
- Engine - John Deere, 4045T, 4 cyl. (Tier 3)
- Displacement - 275 cubic inches (4.5 L)
- Horsepower - 99 @ 2,400 RPM (74 kW)
- Net torque - 261 ft-lb @1600 RPM (354Nm)
- Air cleaner, heavy duty - Dry type
- Oil filter, spin on - Full flow
- Auxiliary engine shutdown system
- Engine Access
BLOWER, RUBBER LINED
- Aluminum alloy high volume open face turbine
- Purpose - Creates blast and suction
- Bearings - (2) sealed lifetime lube, anti-friction
- Bolt-on housing - Abrasion resistant, replaceable liner
- Drive - Heavy duty power band
DUST SEPARATOR
- Type - Cyclonic, multipass, centrifugal separation
- Size - 20" x 61" cylindrical area (508 mm x 1549 mm)
- Location - Axial to blower within hopper super structure
- Particulate removal - Through 61" (1549 mm) skimmer slot into hopper
- Inspection - Hinged door, opened from hopper exterior
- Housing - Abrasion resistant, w/replaceable wear resistant liner
HOPPER
- Capacity (volumetric) - 7.3 cubic yards (5.6 m³)
- Capacity (useable) - 6 cubic yards (4.6 m³)
- Construction - Welded steel plate with integral stiffeners
- Floor angle - 22°
- Dump door opening - 84" x 44" I.D. (2134 mm x 1118 mm)
- Dumping method - Hydraulic with raker bar
- Dumping height - 36" (914 mm)
PICK-UP HEAD
- Function - Air blast and suction chamber
- Width - 87" I.D. (2210 mm)
- Head area - 2,610 sq. inches (1.68 m²)
- BAH® area - 3,567 sq. inches (2.3 m²)
- Suspension - 4 springs 2 drag links
- Skids - DUO-SKIDS®
- Suction & Pressure hose - 14" diameter (356 mm)
- Pressure bleeder - Integral for leaf/light material pickup
GUTTER BROOMS, DUAL (PATENTED)
- Standard equipment includes floodlights and parabolic mirrors
- Drive - Constant speed non-reversible hydraulic motor
- Adjustment - Adjustable for down pressure, pattern and wear
- Down pressure - Automatically adjusts to requirement
- Flexibility - All directions integral anti-damage "swing away" relief valve
- Broom - 43" dia. (1.1 m) steel wire, vertical digger
HYDRAULIC SYSTEM
- Operates gutter broom(s), dump and pick-up head
- Drive (diesel) - Gear driven from auxiliary engine
- Drive (CNG) - Belt driven from auxiliary engine
- Capacity - 8 GPM (30.3 LPM)
- Reservoir - 25 gal. (94.6 L) with 80 mesh suction strainer, site/temperature gauge
- Filter - 10 micron in-line
DUST CONTROL SYSTEM
- System of water spray nozzles for airborne dust suppression
- Pump - Electric diaphragm
- Reservoir(s) Polyethylene - 330 gal. (1249 L) with hydrant fill hose
- Filter - 80 mesh in-line
- Low water shut-off - Safety shut-off low water warning light in cab coupled with liquid level sensor
- Spray nozzles:
- Around pick-up head - 4
- Gutter brooms (each) - 2
- Hopper (inside) - 1
- Storage Compartment
CONTROLS
- Inside cab (lighted) - Pick-up head, gutter broom(s), ignition and tachometer (auxiliary engine), voltmeter, low water warning system (for dust control system), all safety lights, hour meter, pressure bleeder
- Outside cab - Dump
- Steering - Dual
SAFETY WARNING DEVICES
- Amber rear mounted alternating flashing warning lights
- Amber beacon light with limb guard
- Back up alarm
OPTIONAL EQUIPMENT
- Abrasion protection package
- Auto Sweep Interrupt
- Auxiliary fuse panel
- Auxiliary hand hose 8" dia. (203 mm)
- Auxiliary hand hose hydraulic boom assist
- Auxiliary hand hose catch basin cleaning package
- Auxiliary hydraulic system
- Broom Assist Pick-up Head (BAH®)
- Gutter broom tilt adjuster(s) (right, left or both)
- Gutter broom variable speed
- Gutter broom Drop-Down
- Hi/Low pressure washdown system
- High output water system
- Hopper deluge system
- Hopper drain system
- Hose reel, 50' retractable
- Liquid recovery system
- Low emissions package
- Magnet
- Pick-up head curtain lifter
- Pick-up head deluge(BAH®)
- Pick-up head deluge
- Rear camera / monitor system
- Reverse pick-up head system
- Stainless Steel Hopper
- Color (other than TYMCO standard white)
Special options are available for your individual requirements. Contact your local dealer or TYMCO.
CAB/CHASSIS
Minimum Requirements- Model - International 4300 M-7
- GVW - 31,000 lbs. (14,074 kg)
- Frame - 50,000 PSI
- Engine - MaxxForce 7 389 CID (6.4 L) V8 Diesel - 220 HP
- Transmission - Allison 2500 RDS series 5 speed automatic w/external oil filter
- Alternator - 120 amp
- Batteries - (2) 12V 1300 CCA
- Wheelbase - 165" (4191 mm)
- Fuel tank - 50 gal. (189 L) shared with sweeper
- Tires (2-front, 4-rear) - Tubeless 11R x 22.5
- Steering (Dual) - Integral power assisted with tilt
- Brakes - Dual Air w/ 13.2 CFM air compressor
- Instruments & lights - Full package as required, back-up alarm
- Dual gauge package
- Mirrors - Electric remote controlled and heated
- Air conditioned cab
- AM/FM CD stereo radio
Consult factory for sweeper specifications and other available truck chassis.
GENERAL SWEEPING WIDTH
- Pick-up head only - 87" (2210 mm)
- With 1 gutter broom - 110" (2794 mm)
- With 2 gutter brooms - 142" (3606 mm)
OVERALL DIMENSIONS (APPROXIMATE)
- Length w/extra water - 248" (6299 mm)
- Width - 96" (2438 mm)
- Height @ truck - 118" (2997 mm)
- Height, less beacon light - 103" (2616 mm)
- Empty weight* - 17,195 lbs (7806 kg)
- Weight (sweeper)* - 7,980 lbs (3622 kg)
* Dimensions and weight may vary with equipment.
Updated: 11/6/2011
SWEEPER AUXILIARY ENGINE, DIESEL (STANDARD)
- Engine - John Deere, 4045T, 4 cyl. (Tier 3)
- Displacement - 275 cubic inches (4.5 L)
- Horsepower - 99 @ 2,400 RPM (74 kW)
- Net torque - 261 ft-lb @1600 RPM (354Nm)
- Air cleaner, heavy duty - Dry type
- Oil filter, spin on - Full flow
- Auxiliary engine shutdown system
BLOWER, RUBBER LINED
- Aluminum alloy high volume open face turbine
- Purpose - Creates blast and suction
- Bearings - (2) sealed lifetime lube, anti-friction
- Bolt-on housing - Abrasion resistant, replaceable liner
- Drive - Heavy duty power band
DUST SEPARATOR
- Type - Cyclonic, multipass, centrifugal separation
- Size - 20" x 61" cylindrical area (508 mm x 1549 mm)
- Location - Axial to blower within hopper super structure
- Particulate removal - Through 61" (1549 mm) skimmer slot into hopper
- Inspection - Hinged door, opened from hopper exterior
- Housing - Abrasion resistant, w/replaceable wear resistant liner
HOPPER
- Capacity (volumetric) - 7.3 cubic yards (5.6 m³)
- Capacity (useable) - 6 cubic yards (4.6 m³)
- Construction - Welded steel plate with integral stiffeners
- Floor angle - 22°
- Dump door opening - 84" x 44" I.D. (2134 mm x 1118 mm)
- Dumping method - Hydraulic with raker bar
- Dumping height - 36" (914 mm)
PICK-UP HEAD
- Function - Air blast and suction chamber
- Width - 87" I.D. (2210 mm)
- Head area - 2,610 sq. inches (1.68 m²)
- BAH® area - 3,567 sq. inches (2.3 m²)
- Suspension - 4 springs 2 drag links
- Skids - DUO-SKIDS®
- Suction & Pressure hose - 14" diameter (356 mm)
- Pressure bleeder - Integral for leaf/light material pickup
GUTTER BROOMS, DUAL (PATENTED)
- Standard equipment includes floodlights and parabolic mirrors
- Drive - Constant speed non-reversible hydraulic motor
- Adjustment - Adjustable for down pressure, pattern and wear
- Down pressure - Automatically adjusts to requirement
- Flexibility - All directions integral anti-damage "swing away" relief valve
- Broom - 43" dia. (914 mm) steel wire, vertical digger
HYDRAULIC SYSTEM
- Operates gutter broom(s), dump and pick-up head
- Drive (diesel) - Gear driven from auxiliary engine
- Drive (CNG) - Belt driven from auxiliary engine
- Capacity - 8 GPM (30.3 LPM)
- Reservoir - 25 gal. (94.6 L) with 80 mesh suction strainer, site/temperature gauge
- Filter - 10 micron in-line
- Cooler
DUST CONTROL SYSTEM
- System of water spray nozzles for airborne dust suppression
- Pump - Electric diaphragm
- Reservoir(s) Polyethylene - 330 gal. (1249 L) with hydrant fill hose
- Filter - 80 mesh in-line
- Low water shut-off - Safety shut-off low water warning light in cab coupled with liquid level sensor
- Spray nozzles:
- Around pick-up head - 4
- Gutter brooms (each) - 2
- Hopper (inside) - 1
CONTROLS
- Inside cab (lighted) - Pick-up head, gutter broom(s), ignition and tachometer (auxiliary engine), voltmeter, low water warning system (for dust control system), all safety lights, hour meter, pressure bleeder
- Outside cab - Dump
- Steering - Dual
SAFETY WARNING DEVICES
- Amber rear mounted alternating flashing warning lights
- Amber beacon light with limb guard
- Back up alarm
CABOVER MOUNTING INCLUDES
- Storage/toolbox - 46" x 16" x 34"
- Access platform
OPTIONAL EQUIPMENT
- Abrasion protection package
- Auto Sweep Interrupt
- Auxiliary fuse panel
- Auxiliary hand hose 8" dia. (203 mm)
- Auxiliary hand hose hydraulic boom assist
- Auxiliary hand hose catch basin cleaning package
- Auxiliary hydraulic system
- Broom Assist Pick-up Head (BAH®)
- Dustless - (Model DST-6®)
- Extra water capacity
- Gutter broom tilt adjuster(s) (right, left or both)
- Gutter broom variable speed
- Gutter broom Drop-Down
- Hi/Low pressure washdown system
- High output water system
- Hopper deluge
- Hopper drain system
- Hose reel, 50' retractable
- Liquid recovery system
- Low emissions package
- Magnet
- Pick-up head curtain lifter
- Pick-up head deluge (BAH®)
- Rear camera / monitor system
- Reverse pick-up head system
- Runway Sweeper - Model HSP®
- Stainless Steel Hopper
- Color (other than TYMCO standard white)
Special options are available for your individual requirements. Contact your local dealer or TYMCO.
CAB/CHASSIS
Minimum Requirements- Model - UD3300
- GVW - 32,900 lbs. (14,937 kg)
- Frame - 51,200 PSI
- Engine - MD 230 diesel engine, 230 HP @ 2500 RPM, 506 lb-ft @ 1500 RPM
- Transmission - Allison 2500 RDS-P automatic w/ Overdrive, Less PTO
- Alternator - 105 amp
- Batteries - 12V dual 1300 CCA
- Wheelbase - 150" (3810 mm)
- Fuel tank - 50 gal. (189 L) shared with sweeper
- Tires (2-front, 4-rear) - Tubeless 11R x 22.5, 14 ply
- Steering (Dual with gauges) - Full power
- Brakes - Full Air w/ 20.8 CFM air compressor
- Instruments & lights - Full package as required, back-up alarm
- Mirrors - Western remote controlled and heated
- Air conditioned cab
- AM/FM CD stereo radio
Consult factory for sweeper specifications and other available truck chassis.
GENERAL SWEEPING WIDTH
- Pick-up head only - 87" (2210 mm)
- 1 gutter broom - 110" (2794 mm)
- 2 gutter brooms up to - 142" (3606 mm)
OVERALL DIMENSIONS (APPROXIMATE)
- Length - 270" (6858 mm)
- Width - 96" (2438 mm)
- Height - 118" (2997 mm)
- Height, less beacon light - 103" (2616 mm)
- Empty weight* - 18,140 lbs (8236 kg)
- Weight (sweeper)* - 7,980 lbs (3622 kg)
* Dimensions and weight may vary with equipment.
Updated: 11/6/2011
