Options

Operator Friendly and Productivity Options

Gutter Broom – Right or Twin
The TYMCO Model 435® gutter broom assists in removing debris from around curbs, medians and other obstacles with a 32" diameter steel digger broom with in-cab controls.
Gutter Broom Tilt Adjuster – Left, Right or Twin
The gutter broom tilt adjuster uses in-cab controls to adjust the gutter broom to the pitch of the surface being swept. The deepest curbs or gutters along parking islands, medians or other obstacles are no challenge when your Model 435’s gutter broom(s) are equipped with tilt adjusters.
Variable Speed Gutter Brooms
Allows the gutter broom speed to be controlled from inside the cab to adjust the broom speed to the type of debris being swept; for example, slowing the brooms down in extremely dusty environments to reduce the amount of ambient dust being kicked up.
Sound Reduction Engineering (SRE) Package
The Sound Reduction Engineering (SRE) Package allows the Model 435 to sweep in areas where only truck engine noise levels are desirable. SRE isolates various noise sources on the sweeper and addresses those areas through elimination or redesign. Sweeping near residential areas with noise pollution restrictions are not a problem when your Model 435 is equipped with SRE.
Hopper Deluge System
The Hopper Deluge System is a high volume water system designed to expedite flushing of the hopper after sweeping.

Rear Mounted Back-Up Camera/Monitor System
City streets and roads are full of cars, maintenance equipment, signs, light poles, trees and many other objects that need to be seen when backing up. The rear view back-up camera with in-cab display allows the operator to view the area behind the Model 435 while backing up providing additional safety and peace-of-mind to both Model 435 operators and owners.
Auxiliary Hand Hose
For cleaning in tight areas commonly found in downtown districts and construction sites such as around dumpsters and containers. The 10’ hand hose is 6” in diameter and comes with a 36” aluminum nozzle. An additional 10’ hose is available with a quick coupler for even more versatile cleaning.
Stainless Steel Hopper
For maximum corrosion and salt spray resistance, all hopper body sheets as well as the hopper screen are fabricated with low carbon, high chrome stainless steel. Stainless steel bolt-on blower housing, dust separator and hopper drain are also available.
Hopper Drain System
Allows the Model 435 to operate in wet conditions by draining excess water picked up while sweeping.
Hopper Load Indicators
Sensor with audible and visual indicators in-cab that signals a full hopper load.